Walk-in door won't close, seal or stay shut? Gaskets, hinges, closers, latches and strip curtains.
On walk-in coolers and freezers we do door work: gaskets, hinges, closers, latches and strip curtains. If a walk-in is running warm, check first that the door closes and seals all the way. For reach-in coolers and prep tables see our commercial refrigeration repair in Memphis, and for ice makers our ice machine repair and cleaning.
A torn, hardened, or pulled-out gasket lets warm, humid air leak around the door, which can leave condensation at the frame and frost inside the box. We inspect the full seal, identify the correct gasket profile, replace it, and check for gaps at the hinge and latch corners.
Missing, short, or brittle vinyl strips allow a rush of kitchen air into the box every time the door opens. We size the strips for the opening, set the overlap and mounting height, and replace damaged sections so employees can pass through without leaving wide gaps.
A sagging walk-in door may drag on the threshold, miss the latch, or stay partly open after a delivery. We check hinge cams, bushings, closers, latch alignment, and the door frame, then realign the hardware so the gasket meets the frame evenly and the door closes on its own.
A walk-in door that bounces open, won't latch, or needs a shove to close usually has a worn closer, a bent strike, or a broken latch handle. We replace the closer or latch hardware and adjust the strike so the door pulls shut and holds the seal.
Our walk-in work is limited to the door: gaskets, hinges, closers, latches, and strip curtains. If the box is warm with the door sealing properly, the problem is in the refrigeration system, and that work belongs with a licensed refrigeration contractor.
Contact us today for fast, professional Memphis walk-in cooler maintenance services.
Call (901) 257-9417